 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CLOCK Page 1 of 3 CS9L/CSPL SERIES: ULTRA HF CLOCK OSCILLATOR, PECL, +3.3 VDC or +2.5VDC DESCRIPTION: A crystal controlled, high frequency, highly stable oscillator, adhering to Positive Emitter Coupled Logic (PECL) Standards and fundamental crystal or analog multiplication technologies. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for today's automated assembly environments. APPLICATIONS AND FEATURES: " " " " " " " $ Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches; Common Frequencies: 150 MHz; 156.25 MHz; 155.52 MHz; 161.1328 MHz; 212.5MHz; 312.5MHz +3.3 VDC or +2.5VDC PECL Frequency Range from 150.000 to 700 MHz Analog multiplication Miniature Ceramic SMD Package Available on Tape and Reel Lead Free and ROHS Compliant ABSOLUTE MAXIMUM RATINGS: PARAMETER SYMBOL Ta T(stg) Vcc Vi Vo SYMBO L fo Vcc Is Connected between each output and Vcc - 2.0 VDC min max Measured at 50% of Vcc Measured at 20/80% and 80/20% Vcc Levels Integrated Phase tji RMS, Fj = 12 kHz...20 MHz5 Integrated Phase RMS tii offset frequency 50KHz to 80MHz5 Fo<320MHz. Deterministic period Jitter Dj using wavecrest analyzer 4 Fo>320MHz. Fo<320MHz. Random period Jitter Rj using wavecrest analyzer 4 Fo>320MHz. Fo<320MHz. Acumm. Peak to Peak Jitter Tp-p using wavecrest analyzer*4 Fo>320MHz. f=10 Hz f=100 Hz f=1 KHz 6 typ. @212.5MHz f=10 KHz f=100 KHz f>1M Hz Fo<320MHz. Load, nom, Supply nom Fo>320MHz. Op. Temp., Aging, Load, Supply and Cal. Variations High Voltage or No Connect Ground th VALUE -40...+85 -55...+90 +4.6 Vss-0.5...Vcc+0.5 Vss-0.5...Vcc+0.5 UNIT C C VDC VDC VDC Operating temperature range Storage temperature range Supply voltage Maximum Input Voltage Maximum Output Voltage $ ELECTRICAL PARAMETERS: PARAMETER TEST CONDITIONS*1 VALUE 150.000 ~ 700.00** +3.3 or +2.5 5% 80.0 MAX PECL Voh Vol DC tr / tf 50 Vcc-1.025 Vcc-1.620 40/60 to 60/40 or 45/55 to 55/45 0.7 TYP 1.0 MAX*2 0.3 TYP** 0.5 TYP** 1 TYP ** 8 TYP ** 2.5 TYP ** 2.5 TYP** 25 TYP** 27 TYP** -65 -95 -125 -140 -145 -148 -50 -35 20, 25, 50, or 100 MAX 0.7*Vcc MIN 0.3*Vcc MAX *3 UNIT MHz VDC mA VDC VDC % ns ps ps ps ps ps dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc ppm VDC VDC Nominal Frequency Supply Voltage Supply Current Output Logic Type Load Output Voltage Levels Duty Cycle Rise / Fall Time Jitter J Phase Noise (f) Sub Harmonics Overall Frequency Stability Pin 1 Output Enabled Output Disabled f_sub f/fc En Dis RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com CLOCK Page 2 of 3 *1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 3C *2 Frequency Dependent *3 Not All Stabilities Available With All Temperature Ranges--Please Consult Factory For Availability *4 Measured with Wavecrest SIA-3000A 1,000,000 Hits no filtering *5 Calculated from Agilent 5500 phase noise measurements *6 Measured with Agilent 5500 $ PART NUMBERING SYSTEM: SERIES SYMMETRY A: 40/60 to 60/40% T: 45/55 to 55/45% TEMPERATURE RANGE (C) R: S: U: V: 0...+50 0...+70 -20...+70 -40...+85** FREQUENCY STABILITY (Overall) K: 20 ppm** I: 25 ppm** H: 50 ppm J: 100 ppm FREQUENCY (MHz) 150.000...700.000 CS9L: UHF +3.3Vdc Clock with PECL Comp. Output CSPL: UHF +2.5Vdc Clock with PECL Comp. Output EXAMPLE: CS9LASH-155.520 Clock Oscillator, 7x5mm Package, +3.3 VDC Supply Voltage, PECL Output, Standard Symmetry, 0...+70C Operating Temperature Range, 50 ppm Total Frequency Stability, 155.520 MHz **Above 300MHz extended temp range and 25ppm stability may not be available, jitter may vary upon spec requirements. Please consult the factory for any custom requirements. $ MECHANICAL PARAMETERS: INDICATES PIN 1. .197 .008 5.0 0.2 OUTLINE TOLERANCE: 0.006" / 0.15mm (Unless otherwise specified) PIN FUNCTIONS: [1] ENABLE/ DISABLE [2] NO CONNECT [3] CASE GROUND [4] OUTPUT [5] COMP. OUTPUT [6] SUPPLY VOLTAGE MARKING: CS9LASH 155.52 RAL D/C *0.01F external by-pass .276 .008 7.0 0.2 .079 MAX. 2.00 MAX. .200 5.08 .100 2.54 1 .050 1.27 .079 TYP. 2.00 TYP. 3 .150 3.81 2 .087 2.20 6 5 .055 TYP. 1.40 4 .071 1.80 .100 2.54 filter is recommended as seen on solder pattern. SOLDER PATTERN RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com CLOCK Page 3 of 3 ! REFLOW PROFILE: **ROHS COMPLIANT** RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com |
Price & Availability of CS9LTRH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |